@!=1
!===== Parameter File created 10/31/2008=============================
! Parameter files are used with graphic displays to specify the tags a 
! display uses at runtime.  The parameter file is passed to the graphic 
! using the /P option of the Display command.
! Syntax:
!     #replacement=tagname
! Example:
!     #23=A_COLOR
! #23 in any expression in a graphic  would be replaced by the tag A_COLOR.
!============================================================
#1=HMI\Labels\CounterScale30
#2=HMI\Labels\CounterScale31
#3=HMI\Labels\CounterScale32
#4=HMI\Labels\CounterScale33
#5=HMI\Labels\CounterScale34
#6=HMI\Labels\CounterScale35
#7=HMI\Labels\CounterScale36
#8=HMI\Labels\CounterScale1
#9=HMI\Labels\CounterScale2
#10=HMI\Labels\CounterScale3
#11=[Logix]HMI_RecipeOffline.CounterAndScale.MECHGlNonOpUpst
#12=[Logix]HMI_RecipeOffline.CounterAndScale.MECHLdFdFlPlNonOp
#13=[Logix]HMI_RecipeOffline.CounterAndScale.MECHFdWhNonOp
#14=[Logix]HMI_RecipeOffline.CounterAndScale.MECHLdWhNonOp
#15=[Logix]HMI_RecipeOffline.CounterAndScale.MECHAdjustLanes
#16=[Logix]HMI_RecipeOffline.CounterAndScale.MECHGrouperLugs
#17=[Logix]HMI_RecipeOffline.CounterAndScale.MECHMeterLugSp
#18=[Logix]HMI_RecipeOffline.CounterAndScale.MECHWh1OpCup
#19=[Logix]HMI_RecipeOffline.CounterAndScale.MECHWh1NonOpCup
#20=[Logix]HMI_RecipeOffline.CounterAndScale.MECHWh1BrassValve